Construction Supply Systems

Women Owned & Operated  / Blue Book Listed   Contact Us: 302-294-0730

home - thank you for your patience while we build.

Search for:

Washroom Accessories

Toilet Partitions

Fire Cabinets & Extinguishers

Wall Protection-Corner Guards

Projection Screens

Marker, Tack & Bulletin Boards

Directories

Lockers & Benches

Guardian     Invincible II     Stadium     All Welded     Angle Iron     Pro-Tough     Smart Locker     Accessories
       Locker Accessories

Slope Top Construction

 

  

Slope Top Kit

Designed to convert stock flat top lockers into slope top lockers in groups of 3 wide. Each Kit contains 3 tops, 3 backs and 4 ends. Also available for quick shipment in 028 Gray. (Not for use on Invincible II or All Welded lockers, use Continuous Slope Top Hood listed below.)

 Slope tops are often used instead of flat tops to prevent the accumulation of dust and debris, and to discourage the use of locker tops as a storage areas. There are three different types of slope top construction; Unit Slope Tops, Slope Top Kits and Continuous Slope Hoods.

Unit Slope Tops

Unit Slope Tops cover the width of one locker frame only. Lockers with Unit Slope Tops have sides with mitered top ends with a rise equal to 1/3 of the locker depth, plus longer backs that meet the rear edge of the slope top. Unit slope tops are used in place of the standard flat tops. Order the appropriate locker plus the proper slope top size. (Not for use on Invincible II or All Welded lockers, use Continuous Slope Top Hood listed below.)
Continuous Slope Top Hood

Continuous slope hoods fit on top of flat top lockers. They can be used on new lockers, or on a retrofit basis. All hoods are furnished in 72" lengths and must be cut to length during installation. Intermediate splices, ends and rear supports (2 per hood) complete the installation, and must be ordered separately.

 

Locker Fillers

Penco provides standard fillers to adapt lockers to a wide range of field conditions and provide a professional, finished appearance. They can be used to cover columns, pipes or other obstacles in a row of lockers, or fill the gap between the lockers and a wall.

Vertical Fillers                                                                 Top Fillers

 

                                                                          

Vertical fillers come in three widths and are designed to be used in conjunction with Wall Angle Slip Joints for a solid fit and smooth finish. The slip joint conceals any raw edges caused by field cutting. Top Fillers cover gaps between tops of lockers. They overlap the locker tops and can be field cut to allow for pipes, etc. There are separate designs for flat top vs. slope top, and in-line vs. corner applications
 

Vertical Fillers
 These can be used to cover columns, pipes or other obstacles in a row of lockers, or fill the gap between lockers and a wall. They are designed to be used with Wall Angle Slip Joints for a solid fit and smooth finish.

Zee Bases

Used to raise lockers without legs 4" off the floor when there is no concrete or wood base. They provide a toe space in the front and a concealed flange for floor anchoring at the rear. (Not for use in welded lockers.)

Locks

Penco lockers are designed to accept built-in key or combination locks, padlocks and in certain circumstances coin or card locks. Locks are always ordered separately.

Built-In Key Locks

Flat key or grooved key models available. Can be obtained in different key combinations or key combinations or keyed alike. Reversible for LH & RH applications.

Built-in Combination Locks

Five combination changes for security. Master key controlled. Available in LH & RH models

                                                                                                                        

Oval: Lock Solutions Combination Padlock - Available with and without master keying. 3 number dialing. Rust resistant. Fits all Penco lockers.

Coin/Card Operated
 Ideal for public or private applications that require security with the assurance that keys will be returned or as a revenue producer. Coin and token locks fit most Penco lockers. Available in 4 types; coin return, coin collection or token operation. Not available for Defiant lockers. Card activated locks fit some lockers with special modifications.
 

  

Top Fillers
 Top Fillers cover gaps between tops of lockers. They overlap the locker tops and can be field cut to allow pipes, eta. There are separate designs for flat top, in-line and corner applications.

Bench Tops

A natural accessory for any locker room. Exceptionally strong. Made from selected hardwood with a clear finish. 9-1/2" deep x 1-1/4" thick. (Order Pedestals separately.)

Bench Pedestals Penco offers a choice in bench pedestal styles.

                                     

A. Heavy Duty Pedestal - 16 1/4" high.
Pedestal consists of a heavy duty steel tube welded to top and bottom flanges. Hardware for fastening to the bench only is included. Order two or more pedestals per bench. Available in 21 colors. Pedestal must be anchored to the floor.

B. Stainless Steel Free Standing Pedestal - 16-1/4" high.
This pedestal has a 14" wide base which allows for movable free standing use. Holes in the bottom are provided for optional floor anchoring. Hardware supplied for fastening to the bench top.

 

For help with your locker needs, give us a call

302-635-7537

or Contact Us