B-4388

Sati-finish stainless steel unit and dispensing mechanism. Flush tumbler lock. Holds two rolls up to 5 1/4" diameter (1800 sheets). Extra roll drops in place when bottom roll is depleted. Theft-resistant, heavy-duty spindles.

Extends 2 3/4" from wall. Rough wall opening: 6 1/4" W. 11  1/4"H, 3 1/4"min. depth. Av. Mtg. Ht is 28 3/4" - 36 3/4" to top of unit. Barrier-Free 28 3/4".

Molded plastic spindle with concealed locking feature is available as an option or replacement part for Bobrick surface-mounted and recessed toilet tissue dispensers. After rolls are depleted, spindle is removed with special key furnished: theft-resistant.

B-265

Bright-polished chrome-plated steel. Self-locking mechanism. Controlled delivery. Accommodates one standard-cor toilet tissue roll up to 4 1/2" diameter. Roll cannot be removed from dispenser until empty.

Unit 6" W, 2 3/4"H, Projects 4 1/4" from wall.

B-265 Classic Series Surface Mounted Vandal Resistant Toilet Tissue Dispenser for Two Rolls

Bright-polished chrome-plated steel. Self-locking mechanism. Controlled delivery. Accommodates two standard one-core toilet tissue rolls up to 4 1/2" diameter. Roll cannot be removed from dispenser until empty.

Unit 12 1/4" W, 2 3/4" H, Projects 4 1/4" from wall.

Satin-finish stainless steel. Equipped with tumbler lock: vandal-resistant. Dispenses either single or double-fold toilet tissue. Large capacity: 1330 single-fold tissues. Slots in cabinet indicate refill time. May be refilled with full standard pack before dispenser is empty.

Unit 5"W, 815/16" H, 3" D.

B-274 - B-2730

B-273 Toilet Tissue Dispenser for Single Roll, With Controlled Delivery

B-2740 - Classic Series Surface Mounted Toilet Tissue Dispenser for Two Rolls

Double-roll toilet tissue dispenser shall have a heavy-duty cast-aluminum bracket with satin finish. Theft-resistant spindles shall
be molded high-impact ABS with retractable pins and concealed locking mechanisms. Unit shall accommodate two standard-core
toilet tissue rolls up to 6" (152mm) diameter (2000 sheets).

B-274 Similar to B-2740, with controlled delivery.

B-2746 Double Roll Toilet Tissue Dispenser with Controlled Delivery

Controlled delivery of toilet tissue rolls; spindles revolve 3/4 revolution on each dispensing operation. Counterbalanced
spindles automatically return to original position. Eliminates waste. Accommodates two standard-core toilet tissue rolls up to 6"
(150mm) diameter (2000 sheets). Tumbler lock secures spindles in place; spindles can only be removed after unlocking with
key furnished—vandal-resistant molded high-impact ABS. Unit shall accommodate two standard-core toilet tissue rolls up to 6" (150mm) diameter (2000 sheets) and provide controlled delivery operation.

B-27460 Double Roll Toilet Tissue Dispenser

Double-roll toilet tissue dispenser shall have a heavy-duty cast-aluminum bracket with satin finish. Bracket shall be equipped
with a tumbler lock to secure spindles in place. Vandal-resistant spindles shall be molded high-impact ABS. Unit shall
accommodate two standard-core toilet tissue rolls up to 6" (152mm) diameter (2000 sheets). Manufacturer's service and parts
manual shall be provided to the building owner/manager upon request.

Unit holds 3 standard-core toilet tissue rolls up to 4-1/2" (120mm) maximum diameter. Tissue rolls are loaded into the cabinet
through the top. Extra roll shall be manually dropped in place when bottom roll is depleted.

Surface-mounted three roll toilet tissue dispenser shall be type-304 stainless steel all-welded construction; exposed surfaces
shall have satin finish. Lid shall be secured to cabinet with a hinge and equipped with a tumbler lock keyed like other Bobrick
washroom accessories. Unit shall dispense three standard-core toilet tissue rolls up to 4-1/2" (125mm). Extra roll shall be
manually dropped in place when bottom roll is depleted.

Surface-mounted toilet tissue dispenser and utility shelf shall be type-304 stainless steel with satin finish. Shelf shall have 1/2" (13mm) return edges with front edge hemmed for safe handling. *Spindles shall be chrome-plated plastic with heavy-duty internal spring and shall hold standard-core toilet tissue rolls up to 5‑1/2" (140mm) diameter (1800 sheets).

Surface-mounted multi-roll toilet tissue dispenser shall be type-304 stainless steel with all-welded construction, including dispensing mechanism, inner housing and cam; exposed surfaces shall have satin finish. Front of toilet tissue dispenser door shall be drawn, one-piece, seamless construction. Door shall be secured to cabinet with two rivets and equipped with a tumbler lock keyed like other Bobrick washroom accessories. Unit shall dispense two standard-core toilet tissue rolls up to 5-1/4" (133mm) diameter (1800 sheets). Extra roll shall automatically drop in place when bottom roll is depleted. Unit shall be equipped with two theft-resistant, heavy-duty, one‑piece, molded ABS spindles.

Single jumbo-roll toilet tissue dispenser door stainless steel with satin-finish. Door is equipped with a lock not keyed like other Bobrick washroom accessories. Door will have a slot to reveal toilet tissue supply inside cabinet. Spindle adapter will accommodate one toilet tissue roll up to 10" (255mm) diameter with 3" (75mm) core. Spindle to be convertible in the field to dispense a 1-5/8" (40mm) diameter core roll by removing plastic spindle adapter. Spindle to be convertible in the field to dispense a 2-1/8" (55mm) diameter core roll by adding rubber o-rings (2) furnished.

Door unlocks with key provided and swings down for loading dispenser. Spindles accommodate two toilet tissue rolls up to 10" (255mm) diameter with 3" (75mm) diameter core, or remove outer spindle (which is held in place with 3 snaps) from the inner spindles to accommodate   2-1/4" (55mm) diameter core rolls. Unique sliding access panel exposes one roll at a time for patron use, assuring uninterrupted, complete no-waste use of first roll before starting the reserve roll; allows easy roll change-over. When first roll is depleted, move the lever at the bottom of dispenser to the left until sliding access panel locks in position and exposes roll on right. When door is opened for reloading, the sliding access panel automatically releases and returns to the original position on the right. Move the remaining roll to the first position on left and install a new roll on the right spindle. Wide viewing slot in door reveals the amount of toilet tissue on both rolls. Unit is designed for quick reloading.

Recessed sanitary napkin disposal and toilet tissue dispenser shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish. Flange shall be drawn and beveled, one-piece, seamless construction. Self-closing disposal panel shall be secured to cabinet with a spring-loaded, full-length stainless steel piano-hinge and equipped with an international graphic symbol identifying napkin disposal. Removable waste receptacle shall be equipped with a tumbler lock keyed like other Bobrick washroom accessories and shall have a minimum capacity of 3/4-gal. (2.8-L). Unit shall be equipped with two chrome-plated plastic toilet tissue spindles that hold standard-core rolls up to 5-1/4'' (135mm) diameter (1800 sheets).

Partition-mounted dual-sided multi-roll toilet tissue dispenser shall be type-304 stainless steel with all-welded construction;
exposed surfaces shall have satin finish. Flanges shall be drawn and beveled, one-piece, seamless construction. Unit shall
mount in toilet partition and shall serve two toilet compartments. Unit shall dispense four standard-core toilet tissue rolls up to
5-1/8" (130mm) diameter (1500 sheets). *Spindles shall be equipped with a heavy-duty internal spring.

Rough Partition Cutout, 11-1/2" (290mm) wide 10-7/8" (275mm) high, 1/2" to 2" (12 to 50mm) partition thickness

Recessed multi-roll toilet tissue dispenser shall be type-304 stainless steel with all-welded construction, including dispensing
mechanism, inner housing and cam; exposed surfaces shall have satin finish. Front of toilet tissue dispenser door shall be drawn,
one-piece, seamless construction. Door shall be secured to cabinet with two rivets and equipped with a tumbler lock keyed like other
Bobrick washroom accessories. Flange shall be drawn, one-piece, seamless construction. Unit shall dispense two standard-core toilet
tissue rolls up to 5-1/4" (135mm) diameter (1800 sheets). Extra roll shall automatically drop in place when bottom roll is depleted. Unit
shall be equipped with two theft-resistant, heavy-duty, one-piece, molded ABS spindles.

Surface-mounted multi-roll toilet tissue dispenser shall be type-304 stainless steel with all-welded construction, including dispensing
mechanism, inner housing and cam; exposed surfaces shall have satin finish. Front of toilet tissue dispenser door shall be drawn, one piece,
seamless construction and shall have same degree of arc and match other Bobrick Contura Series® accessories in the washroom.
Radius on corners and edges of door and cabinet shall complement other Bobrick Contura-Series® washroom accessories. Door shall
be secured to cabinet with two rivets and equipped with a flush tumbler lock keyed like other Bobrick washroom accessories. Unit
shall dispense two standard-core toilet tissue rolls up to 5-1/4" (133mm) diameter (1800 sheets). Extra roll shall automatically drop
in place when bottom roll is depleted. Unit shall be equipped with two theft-resistant, heavy-duty, one-piece, molded ABS spindles.

Recessed multi-roll toilet tissue dispenser shall be type-304 stainless steel with all-welded construction, including dispensing mechanism,
inner housing and cam; exposed surfaces shall have satin finish. Front of toilet tissue dispenser door shall be drawn, one-piece, seamless
construction and shall have same degree of arc and match other Bobrick Contura Series® accessories in the washroom. Radius on corners
and edges of flange and door shall complement other Bobrick Contura Series® washroom accessories. Door shall be secured to cabinet
with two rivets and equipped with a flush tumbler lock keyed like other Bobrick washroom accessories. Flange shall be drawn, one-piece,
seamless construction. Unit shall dispense two standard-core toilet tissue rolls up to 5-1/4" (135mm) diameter (1800 sheets). Extra roll shall
automatically drop in place when bottom roll is depleted. Unit shall be equipped with two theft-resistant, heavy-duty, one-piece, molded ABS
spindles.

Surface-mounted multi-roll toilet tissue dispenser shall be durable, high-impact grey ABS with high-gloss finish on exposed surfaces. Front of
door shall have same degree of arc and match other Bobrick Matrix Series™ accessories in the washroom. Radius on corners, edges, and top of door shall complement other Bobrick Matrix Series™ s washroom accessories. Door shall be secured to mounting plate with two keyed pivots
and a concealed locking device keyed like other Bobrick washroom accessories. Unit shall be equipped with a one-piece, dual toilet tissue
spindle. Unit shall dispense two standard-core toilet tissue rolls up to 5-3/4" (145mm) diameter (2000 sheets). Extra roll shall be manually
lowered into place when bottom roll is depleted. Replacement part numbers shall be molded into unit.

Jumbo-roll toilet tissue dispenser shall be durable, high-impact grey ABS with high gloss finish on exposed surfaces. Front of door
shall have same degree of arc and match other Bobrick Matrix Series™ accessories in the washroom. Radius of corners, edges, and top
of door shall complement other Bobrick Matrix Series™ washroom accessories. Door shall be secured to back plate with two vandal resistant
screws at pivot points and a concealed locking device keyed like other Bobrick washroom accessories. Door shall have a slot
to reveal toilet tissue supply inside cabinet. Plastic spindle shall accommodate one toilet tissue roll up to 10" (255mm) diameter with
3" (75mm) diameter core. Spindle shall be convertible in the field to dispense a 2-1/4" (55mm) diameter core roll by removing outer
spindle furnished in-place.

Spare toilet roll holder shall be type-304 stainless steel with satin-finish. Toilet roll holder shall have 0.9mm (20-gauge) wall
thickness and 19mm (3/4") outside diameter. Clearance between the toilet roll holder and wall shall be 55mm (2-1/8'').
Concealed mounting flange shall be 5.6mm (7/32") thick stainless steel plate, 46mm (1-13/16") outside diameter and equipped
with two screw holes for attachment and thread on outside edge to fasten cover. Threaded flange cover shall be 1.4mm
(17-gauge) stainless steel, 49mm (1-15/16") diameter and shall fasten over mounting flange to conceal mounting screws. End
of toilet roll holder shall pass through flange and be welded to form one structural unit. Shelf plate shall be 3mm (1/8") thick
stainless steel plate, 49mm (1-15/16") outside diameter and 19mm (3/4") inside diameter. Toilet roll holder shall pass through
shelf plate and be welded to form a solid base.